TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 259 of 576

TM 9-2330-227-14&P

LAMP BOX - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

INSTALLATION

-

CONTINUED

9.

Box (1) and

frame member (4)

10.

Box (1)

Three Iockwashers

Screw in, and tighten using 7/16-inch soc-

(6), screws (5),

ket extension, ratchet handle with 3/8-

and nuts (7)

inch drive, and 7/16-inch box-end wrench.

Hook clamp (2)

a. Close lid (3).

and lid (3)

b. Lift and hook clamp (2).

INSIDE PANELING AND INSULATION

This task covers:

a. Removal (page 4-174)

b. Installation (page 4-174)

INITIAL SETUP

Tools

Screwdriver, cross-tip, number two

Personnel Required

Two

Equipment Condition

Data plates removed (page 4-186)

(where necessary).

Door switches removed (page 4-37)

(where necessary).

Equipment Condition - Continued

Inside domelight, 24-volt, removed

(page 4-61) (where necessary).

Inside domelight, 110-volt, removed

(page 4-67) (where necessary).

Junction boxes removed (page 4-42)

(where necessary).

Light switches removed

(page 4-35) (where necessary).

Screens removed (page 4-163)

(where necessary).

Wall receptacles and base removed

(page 4-32) (where necessary).

TA231319

4-173