TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 252 of 576

4-166

TM 9-2330-227-14&P

DOORS

This task covers:

a. Removal (page 4-166)

b. Installation (page 4-168)

INITIAL SETUP

Tools

Materials/Parts - Continued

Bar, pry

Rags, wiping (item 16, appendix E)

Hammer, hand, ball-peen, 2-lb

Solvent, drycleaning PD-680 (item 18,

Handle, ratchet, 1/2-inch drive

(appendix E)

Knife, putty

Screwdriver, cross-tip, number two

Personnel Required

Screwdriver, fiat-tip, 3/16-inch

Socket, 1/2-inch drive, 1/2-inch

Two

Wrench, box-end, 1/2-inch

Equipment Condition

Materials/Parts

Insulation removed as required (page 4-173).

Adhesive (item 1, appendix E)

Brush, acid swabbing (item 4, appendix E)

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

1.

Two hinges (1)

and van body (2)

2.

Van body (2)

3.

Top bracket (6)

and paneling (7)

Six screws (3)

With aid of assistant, and using 1/2-inch

and nuts (4)

socket, ratchet handle with 1/2-inch

drive, and 1/2-inch box-end wrench,

unscrew and take off.

Door (5)

With aid of assistant, open and take off.

Two screws (8)

Using number two cross-tip screwdriver,

and unscrew take off.

Rear doors have four screws.