TM-9-2330-227-14-P
SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1985
TM-9-2330-227-14-P - Page 246 of 576
TM 9-2330-227-14&P
WINDOWS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
ASSEMBLY - CONTINUED
17.
18.
19.
20.
21.
22.
23.
Window frame (1)
Weather
stripping (2)
Put adhesive on frame (1), and let
dry until tacky.
Put weather stripping (2) in place,
and push down until fully seated all
around.
Let dry.
a.
b.
c.
Eight spacers (3)
26 screws (4)
Put in place.
Screw in, and tighten using 3/16-inch
fiat-tip screwdriver.
Put in place.
Screw in, and tighten using 3/16-inch
flat-tip screwdriver.
Put in place.
Screw in, and tighten using 3/16-inch
flat-tip screwdriver.
Blackout
brackets (5)
17 screws (6)
Blackout
brackets (5) and
window frame (1)
Window frame (1)
Handle bracket (7)
Four screws (8)
Handle bracket (7)
and window
frame (1)
INSTALLATION
24.
25.
26.
27.
28.
29.
Van body (9)
Hinge (10)
Six screws (11)
Window assembly (12)
Put in place.
Hinge (10) and
van body (9)
Screw in, and tighten using number two
cross-tip screwdriver.
Hinge (10)
With aid of assistant, hold assembly (2)
at an angle, and using ball-peen hammer,
tap into hinge (10).
Window assembly (12)
and hinge (10)
Screw (13)
Handle (16)
Screw in, and tighten using 1/8-inch
fiat-tip screwdriver.
Window assembly (12)
inside latch (14),
and screen (15)
Release latch (14), and hold.
Have assistant lift window (12) up
a.
b.
and feed handle (16) through
screen (15) opening over latch (14).
Using slip-joint pliers, bend in place.
Handle (16)
Clip (17)
4-160
Back to Top
