TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 243 of 576

TM 9-2330-227-14&P

WINDOWS

This task covers:

a. Removal (page 4-157)

c. Assembly (page 4-159)

b. Disassembly (page 4-158)

d. Installation (page 4-160)

INITIAL SETUP

Tool s

Materials/Parts

Hammer, ball-peen, 2-lb

Adhesive, (item 1, appendix E)

Knife, putty

Brush, acid swabbing (item 4, appendix E)

Pliers, long round-nose

Rags, wiping (item 16, appendix E)

Pliers, slip-joint

Solvent, drycleaning, PD-680 (item 18,

Screwdriver, cross-tip, number two

appendix E)

Screwdriver, flat-tip, 1/8-inch

Screwdriver, flat-tip, 3/16-inch

Personnel Required

Stepladder (two required)

Two

ACTION

LOCATION

ITEM

REMARKS

NOT E

All windows are maintained the same way. This task is for one; repeat for the others.

REMOVAL

1.

Handle (1)

Clip (2)

Using slip-joint pliers, bend and take off.

2.

Window assembly (3)

HandIe (1)

a. Release latch (4), and hold.

inside latch (4),

b. Have assistant lift window (3) up

and screen (5)

until handle (1) clears screen (5).

c. Let handle (1) hang vertically, and

swing window (3) down.

4-157