TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 256 of 576

TM 9-2330-227-14&P

CABLE BOX

This task covers:

Repair (page 4-170)

INITIAL SETUP

Tools

Drill, electric, portable, 1/2-inch

Drill, twist, 3/16-inch

Knife, putty

Riveter, hand

Screwdriver, offset, cross-tip,

number two

Materials/Parts - Continued

Brush, acid swabbing (item 4, appendix E)

Rags, wiping (item 16, appendix E)

Rivets (six required)

Solvent, drycleaning, PD-680

(item 18, appendix E)

Wrench, adjustable, 12-inch

Personnel Required

Materials/Parts

One

Adhesive (item 1, appendix E)

ACTION

LOCATION

ITEM

REMARKS

REPAIR

1.

Box (1), hasp

Hook (4) and

(2), and

lid (5)

latch (3)

2.

Chain (6) and

Screw (7), washer

box (1)

(8), Iockwasher (9)

and nut (10)

3.

Box (1)

Chain (6) with

hook (4)

4.

Hasp (2) and

Two rivets (11)

lid (5)

5.

Lid (5)

Hasp (2)

6.

Latch (3) and

Four rivets (12)

box (1)

7.

Box (1)

Latch (3)

8.

Lid (5)

Four strips (13)

4-170

a. Take hook (4) off latch (3).

b. Open hasp (2) and lid (5).

Using number two offset cross-tip screw-

driver and 12-inch adjustable wrench,

unscrew and take off.

Take off.

Using 3/16-inch twist drill and 1/2-inch

portable drill, drill out.

Take off.

Using 3/16-inch twist drill and 1/2-

inch portable drill, drill out.

Take off.

Using putty knife, scrape off.