TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 260 of 576

TM 9-2330-227-14&P

INSIDE PANELING AND INSULATION - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

NOT E

All paneling and insulation is removed the same way. This task is for one panel and

piece of insulation. Repeat this task for the others, noting number of screws and

particular equipment condition required.

REMOVAL

1.

Molding (1) and

panels (2) and (3)

2.

Panels (2) and (3)

3.

Panel (2) and

body bows (5)

4.

Body bows (5)

5.

INSTALLATIO N

6.

7.

8.

Panel (2) and

body bows (5)

9.

Panels (2)

and (3)

10.

Molding (1) and

panels (2)

and (3)

4-174

33 screws (4)

Molding (1)

33 screws (6)

Panel (2)

Insulation (7)

Insulation (7)

Panel (2)

33 screws (6)

Molding (1)

33 screws (4)

Using number two cross-tip screwdriver,

unscrew and take off.

a. Take off.

b. Repeat steps 1 and 2a for other side.

With assistant holding panel (2), and

and using number two cross-tip screw-

driver, unscrew and take off.

Take off.

Take off.

With aid of assistant, put in place,

and hold.

Put in place, and hold.

With aid of assistant, screw in and

tighten using number two cross-tip

screwdriver.

Put in place.

a. Screw in, and tighten using number two

cross-tip screwdriver.

b. Repeat steps 9 and 10a for other side.