TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 258 of 576

TM 9-2330-227-14&P

LAMP BOX

This task covers:

a. Removal (page 4-172)

b. Installation (page 4-172)

INITIAL SETUP

Tools

Tools - Continued

Extension, 3/8-inch drive, 6-inch

Socket, 3/8-inch drive, 7/16-inch

Handle, ratchet, 1/4-inch drive

Wrench, box-end, 7/16-inch

Handle, ratchet, 3/8-inch drive

Screwdriver, cross-tip, number two

Personnel Required

Socket, 1/4-inch drive, 7/16-inch

One

ACTION

LOCATION

ITEM

REMARKS

REMOVAL

1.

Box (1)

2.

Box (1) and

frame member (4)

3.

Frame member (4)

4.

Hook clamp (2)

and box (1)

5.

Box (1)

INSTALLATION

6.

7.

Hook clamp (2)

and box (1)

8.

Frame member (4)

4-172

Hook clamp (2)

and lid (3)

Three screws (5),

Iockwashers (6),

and nuts (7)

Box (1)

Two screws (8)

and nuts (9)

Hook clamp (2)

Hook clamp (2)

Two screws (8)

and nuts (9)

Box (1)

a. Lift and unhook clamp (2).

b. Open lid (3).

a. Have assistant hold box (1).

b. Using 7/16-inch socket, extension,

ratchet handle with 3/8-inch drive,

and 7/16-inch box-end wrench,

unscrew and take off.

Take off.

Using number two cross-tip screwdriver,

3/8-inch socket, and ratchet handle with

with 1/4-inch drive, unscrew and take off.

Take off.

Put in place.

Screw in, and tighten using number two

cross-tip screwdriver, 3/8-inch socket,

and ratchet handle with 1/4-inch drive.

Put in place.