TM-9-2330-227-14-P
SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1985
TM-9-2330-227-14-P - Page 370 of 576
5-96
TM 9-2330-227-14&P
DECK - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REPAIR - CONTINUED
26.
Left rear
deck
Plate assembly (1)
and plate and
catch assembly (2)
If removed, put through hole in deck
and clamp together.
If removed, screw in and tighten using
number two cross-tip screwdriver.
If removed, put on.
a. Position screws (6) and screws (7)
as noted.
b. Screw in, and tighten using number two
cross-tip screwdriver and 3/16-inch
flat-tip screwdriver as needed.
If removed, put on.
Screw in, and tighten using 3/16-inch
flat-tip screwdriver, 1/2-inch socket,
and ratchet handle with 1/2-inch drive.
If removed, put on and place in
original position.
a. Position screws (12) and screws (13)
as noted.
b. Screw in, and tighten using number two
cross-tip screwdriver and 3/16-inch
flat-tip screwdriver as needed.
If removed, put on.
Screw in, and tighten using 3/16-inch
flat-tip screwdriver, 1/2-inch socket,
and ratchet handle with 1/2-inch drive.
Put in place.
Screw in, and tighten using number two
cross-tip screwdriver.
Put in place.
27.
Harness clamp(s) (3)
underside of deck
Screw(s) (4)
28.
Deck at
side door
Striker
plate (5)
29.
Striker
plate (5)
Two screws (6) and
two screws (7)
30.
Deck at
side door
Threshold
plate (8)
31.
Threshold
plate (8)
Three screws (9)
and nuts (10)
Striker
plates (11)
32.
Deck at rear
doors
33.
Striker
plates (11)
Four screws (12) and
four screws (13)
34.
Deck at
rear doors
Threshold
plate (14)
Threshold
plate (14)
Four screws (15)
and nuts (16)
Rear wall
Molding (17)
Molding (17)
Screws (18)
Side wall
Molding (19)
Back to Top
