5-88
TM 9-2330-227-14&P
LEFT REAR DOOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REPAIR - CONT I
Door (1)
Retainer (3)
Door (1)
NUED
Weatherstrip (2)
and retainer (3)
24 screws (4)
Weatherstrip (5)
Weatherstrip (6)
and retainer (7)
Door (1)
Interior
panel (9)
Door (1)
Plate (13)
14 screws (8)
Interior panel (9)
47 rivets (10)
36 screws (12)
Plate (13)
Four screws (14)
a. Apply adhesive to weatherstrip (2)
and door (1).
b. Place weatherstrip (2) and retainer
(3) in position.
Screw in, and tighten using number two
cross-tip screwdriver.
a. Apply adhesive to weatherstrip (5)
and door (1).
b. Place in position.
a. Apply adhesive to weatherstrip (6)
and door (1).
b. Place weatherstrip (6) and retainer
(7) in position.
Screw in, and tighten using number two
cross-tip screwdriver.
Put on.
a. Fill each hole with rivet (10).
Make sure rivet is fully seated.
b. Using 3/16-inch drive-pin punch and
ball-peen hammer, drive pin (11) flush
with head of rivet (10).
Screw in, and tighten using number two
cross-tip screwdriver.
Put on.
Screw in, and tighten using number two
cross-tip screwdriver.