TM 9-2330-227-14&P
SIDE DOOR AND RIGHT REAR DOOR – CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REPAIR – CONTINUED
36. Door (1)
Four inner
Put on.
frame strips (8)
37. Four inner
16 screws (9)
Screw in, and tighten using number two
frame strips (8)
cross-t i p screwdriver.
36.
26 rivets (6)
a. Push one rivet (6) into each hole.
Make sure rivet is fully seated.
b. Using 3/16-inch drive-pin punch and
ball-peen hammer, drive pin (7) flush
with head of rivet.
39. Door (1)
40. Weatherstrip (10)
and retainer (11)
41.
Door (1)
42. Actuator (13)
Weatherstrip (10)
a. Apply adhesive to weatherstrip (10)
and retainer (11)
and door (l).
b. Place in position.
15 screws (12)
Screw in, and tighten using number two
cross-tip screwdriver.
Actuator (13)
Position on door (1),
Two screws (14)
Screw in, and tighten using number two
cross-t i p screwdriver.
TA231379
5.81