TM-9-2330-227-14-P
SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1985
TM-9-2330-227-14-P - Page 345 of 576
5-71
TM 9-2330-227-14&P
SPRING BRACKETS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
18.
Spring brackets
Two bearings (9)
(1) and (2)
and four washers (10)
19.
Two shafts (7)
20.
Two shafts (7)
Four
Iockscrews (8)
21.
Radius rod (11)
Two washers (12)
22.
Semitrailer
Spring brackets
frame (4)
(1) and (2)
23.
Spring brackets
16 screws (5)
(1) and (2)
and nuts (6)
Position in brackets, and line up holes.
Using 1/2-inch drive-pin punch and
ball-peen hammer, tap in.
Make sure Iockscrew holes line up.
Tighten using 3/8-inch star socket and
ratchet handle with 3/8-inch drive.
a. Coat with grease, and place on each
side of rod.
b. Lineup holes.
Position on frame.
See that radius rod with washers
is seated in spring bracket with
holes lined up.
a. Put longer screws in correct location.
b. Screw together, and tighten using
3/4-inch socket, ratchet handle with
1/2-inch drive, and 3/4-inch open-end
wrench.
Back to Top
