TM 9-2330-227-14&P
SPRING BRACKETS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Screw (1)
2.
Radius rod (4)
and spring
bracket (5)
3.
Spring
bracket (5)
4.
Sleeve bushing (7)
and radius rod (4)
5.
Radius rod (4)
and spring
bracket (5)
6.
Two nuts (9)
7.
Two screws (11)
Retaining nut (2)
and nut (3)
Screw (1)
Two retainers (6)
Setscrew (8)
Sleeve bushing (7)
Two cotter pins (10)
Two nuts (9)
Using 15/16-inch socket, ratchet handle
with 1/2-inch drive, and 15/16-inch open-
end wrench, unscrew and take off.
Using 1/2-inch driftpin and ball-peen
hammer, tap out.
Take off.
You may have to pry off with 3/8.
inch flat-tip screwdriver.
Using 5/8-inch socket, 4-inch extension,
and ratchet handle with 1/2-inch drive,
unscrew and take out.
Using 1-inch drive-pin punch and ball-
peen hammer, drive out.
Using straight-nose slip-joint pliers,
straighten and pull out.
Using 15/16-inch socket, ratchet handle
5-69