5-76
TM 9-2330-227-14&P
SIDE DOOR AND RIGHT REAR DOOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
Two screws (2) and
Iockwasher (3)
Actuator (1)
16 screws (6)
26 rivets (7)
Four inner
frame strips (5)
Cotter pin (9)
Strap (10) and
spring washer (11)
Strap (10)
Screw assembly (13)
Wedge bolt (14)
Four screws (15)
Guide (12)
Lower strap
assembly (16)
Roll pin (18)
Handle (17)
Using number two cross-tip screwdriver,
unscrew and take off.
Take off.
Using number two cross-tip screwdriver,
unscrew and take off.
Using 1/8-inch drive-pin punch and ball-
peen hammer, drive punch through center
of rivet head with a solid blow of hammer.
Rivet heads will either fall off or
can be lifted off with screwdriver.
Lift off.
Using pliers, straighten legs and
pull out,
Lift off.
Pull out.
Using 3/16-inch flat-tip screwdriver,
unscrew and take out.
Take off.
Using number two cross-tip screwdriver,
unscrew and take out.
Take off.
Repeat steps 6 thru 12.
Using 1/16-inch drive-pin punch and ball-
peen hammer, drive out.
Pull off.