TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985

TM-9-2330-227-14-P - Page 365 of 576

TM 9-2330-227-14&P

DECK

This task covers:

Repair (page 5-91)

INITIAL SETUP

Tools

Bar, pry

Drill bit, 11/32-inch

Drill bit, 5/8-inch

Drill, electric, portable, 1/2-inch

Hammer, ball-peen, machinist’s, 2-lb

Handle, ratchet, 1/2-inch drive

Saw, hand, crosscut

Screwdriver, cross-tip, number two

Screwdriver, flat-tip, 3/16-inch

Socket, 1/2-inch drive, 1/2-inch

Personnel Required

Two

ACTION

LOCATION

ITEM

REMARKS

REPAIR

NOT E

The deck is made up of eighteen long boards laid side by side and eighteen short boards

side by side. This is a typical procedure for replacement of one board.

The boards are fitted together with tongue and groove. To replace a board other than

the two outer boards, you must remove each board between the damaged board(s) and

the closest wall, working from the outside in.

5-91