TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 297 of 462

TM 9-2330-238-14

4-82. HOOK STRIP REPLACEMENT (Con’t).

1.

Using a drill and starting with a 1/16-inch twist-drill bit, remove rivets (6) securing hookstrips (2 or 5) from doors

(3 or 4) or comer posts (1) by drilling completely through rivet (6).

Discard rivets.

2.

If necessary, increase bit size in increments up to 1/8-inch until rivet (6) is removed from hole in doors

(3 and 4) or corner posts (1).

NOTE

Hook strips are adhesive backed. For complete removal it may be necessary

to scrape hook strip from door end plate or corner post.

3.

Remove hook strips (2 or 5) from doors (3 and 4) or corner posts (1). Discard hook strips.

Change 1

4-199