TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 299 of 462

TM 9-2330-238-14

4-82. HOOK STRIP REPLACEMENT (Con't).

3.

4.

5.

Align new 1-3/4 (4.45 cm.) inch hook strip (2) over corner post (1). Note position of rivet holes before covering

with hook strip (2).

Butt new hook strips (2 and 5) against door end-plate (7) or corner post (1).

Using a center punch, puncture new hook strip (5) on doors (3 and 4) or hook strip (2) on comer post (1) to

locate existing rivet holes.

6.

To secure new hook strips (2 and 5) insert new rivets (6) in existing holes.

FOLLOW-ON TASKS:

●

Install enclosure curtain (para 2-14).

Change 1

4-201