TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 307 of 462

5-5

TM 9-2330-238-14

5-4. CHASSIS WIRING HARNESS REPLACEMENT (Con’t).

b.

INSTALLATION

NOTE

Number of clamps and screws will vary between models.

1.

Position wiring harness (7) on frame and secure with screws (11) and clamps (10), new Iockwashers (8), and

nuts (9) as necessary.

NOTE

Ground wire terminal is secured with one of four screws.

2.

Position receptacle (2) on crossmember (3). Install four screws (1), new Iockwashers (4), and nuts (5).

3.

Connect connector (6) to receptacle (2).

4.

Connect all cable connectors to receptacle.