TM-9-2330-238-14

CHASSIS, SEMITRAILER: 6-TON, 4-WHEEL M295A1; SEMITRAILER, VAN: EXPANSIBLE, 6-TON, 4-WHEEL M313; SEMITRAILER, VAN: SHOP, FOLDING SIDES, 6-TON, 4-WHEEL M447 AND M447C; SEMITRAILER, VAN: REPAIR PARTS, SHOP EQUIPMENT, 6-TON, 4-WHEEL M749; SEMITRAILER, VAN: REPAIR PARTS STORAGE, 6-TON, 4-WHEEL M750

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

JULY 1992

TM-9-2330-238-14 - Page 300 of 462

TM 9-2330-238-14

4-83. CHAIN-GUARD POST ASSEMBLY REPLACEMENT.

This task covers:

a.

Removal

b.

Installation

Initial Setup:

Equipment Conditions:

●

Van body expanded and single-chain

assembly removed (para 2-14).

Tool/Test Equipment:

●

General mechanic’s tool kit

a.

REMOVAL

NOTE

Chain-guard post assembly is threaded at base.

Remove chain-guard post assembly (1) from flange (2) on lower folding side door (3). Discard post assembly.

b .

INSTALLATION

Install new chain-guard post assembly (1) in flange (2) on

lower folding side door (3).

Make sure post assembly (1)

is completely seated in flange (2).

FOLLOW ON TASK:

●

Replace single-chain assembly (para 2-14).

4-202

Change 1