TM-9-2330-326-14-P

SEMITRAILER, TACTICAL, DROP DECK BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, M871A3

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

FEBRUARY 2006

  TM-9-2330-326-14-P - Page 171 of 540

TM 9-2330-326-14&P
6-95
6-35. CONSPICUITY TAPE REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
c. Follow-On Tasks
Initial Setup:
Tools and Special Tools:
Tool kit, general mechanic’s (item 4, Appendix B-3)
Equipment Conditions:
Semitrailer disconnected from prime mover
Landing legs down
Tires chocked
Ground boards emplaced
a. Removal.
Remove conspicuity tape (1 thru 4) from semitrailer and rear bumper as necessary. Discard
conspicuity tape.
b. Installation.
NOTE
Make sure surface area to be taped is clean and dry.
There are three varieties of rolled conspicuity tape. Be
certain to apply appropriate conspicuity tape only to
the locations indicated below.


Back to Top