TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 188 of 640
TM 9-2330-335-14&P
0032-8
0032
DUST SHIELD REMOVAL AND INSTALLATION - CONTINUED
5.
Install the two nuts onto the filler plate studs to secure the filler plate to the C-section of the dust shield.
6.
Reposition the brake drum tight against the hub flange and check for any dust shield interferences. If there are any light
interference conditions, the dust shield can be slightly displaced by using a small pry bar between the drum and dust
shield in the area where they are rubbing.
Figure 7.
Filler Plate.
032
7.
Ensure plugs (Figure 8, Item 12) are installed.
Figure 8.
Plugs.
032
END OF TASK
447-0061
447-0198
Back to Top
