0032-1
TM 9-2330-335-14&P
0032
ORGANIZATIONAL MAINTENANCE
-
SERVICE BRAKES - SHOES AND LINING REPLACEMENT
Removal, Installation, Dust Shield Removal and Installation
WARNING
Clean and check service brakes and all brake components for wear and damage. Replace worn or
damaged parts. At triennial service replace all springs, pins, rollers, clips, and bushings on each
axle end. Failure to comply may cause injury to personnel and damage to the equipment.
CAUTION
Do not allow lining surfaces to become contaminated with any lubrication. Failure to comply could
cause damage to equipment.
NOTE
•
There are four brake shoe assemblies and they are removed and installed the same way. This
procedure covers one brake shoe assembly.
•
Balance repairs on both axle ends.
INITIAL SETUP
Maintenance Level
0
Organizational
0
Tools and Special Tools
0
Tool kit, general mechanic’s (Item 4, WP 0082)
0
Jack stands
0
Materials/Parts
0
Grease, automotive and artillery (GAA) (Item 6, WP
0085)
0
References
0
WP 0067
0
Equipment Conditions
0
Semitrailer disconnected from prime mover
0
Tires and wheels removed (WP 0021)
0
Brake drum removed (WP 0033)
0
Ground boards emplaced
0
10