TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 174 of 640
TM 9-2330-335-14&P
0030-2
0030
REMOVAL (REAR TO FRONT)
00030
1.
Remove two wiring harnesses (Figure 1, Item 1) from taillights, side clearance lights, and rear wiring harness
(Figure 1, Item 4).
2.
Remove wiring harness (Figure 1, Item 2) from two BO lights and BO socket wiring harness (Figure 1, Item 6).
3.
Remove wiring harness (Figure 1, Item 3) from rear clearance lights and rear wiring harness (Figure 1, Item 4).
4.
Remove ABS main wiring harness (Figure 1, Item 5) from ABS warning light, rear wiring harness (Figure 1, Item 4), and
main wiring harness (Figure 1, Item 10).
NOTE
Excess wire is stored in left-front underside pocket (refer to WP 0041, Figure 1) for M871R.
Excess wire is stored in receptacle converter box compartment (refer to WP 0028, Figure 1) for
M871A1R. Excess wire is stored in nose plate box compartment (refer to WP 0029, Figure 1) for
M871A2R.
5.
Remove midturn ABS wiring harness (Figure 1, Item 7) from two midside clearance lights and main wiring harness
(Figure 1, Item 10).
6.
Remove two PL10 wiring harnesses (Figure 1, Item 9) from front clearance lights and two PL10 marker wiring harnesses
(Figure 1, Item 8).
7.
Remove two PL10 marker wiring harnesses (Figure 1, Item 8) from BO socket wiring harness (Figure 1, Item 6).
8.
Remove BO socket wiring harness (Figure 1, Item 6) and main wiring harness (Figure 1, Item 10).
9.
Remove damaged grommets (Figure 1, Items 11 thru 13), as necessary.
Figure 1.
Wiring Harnesses.
030
END OF TASK
447-0054
Back to Top
