TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 164 of 640
TM 9-2330-335-14&P
0027-2
0027
REMOVAL
00027
NOTE
Only the two outer taillights have ground wires.
1.
Disconnect taillight connector from wiring harness connector behind bulkhead.
2.
Disconnect ground wire from taillight behind bulkhead, if necessary.
3.
Remove three self-tapping screws (Figure 1, Item 2) and taillight (Figure 1, Item 1). Discard screws.
Figure 1.
Taillight.
027
END OF TASK
INSTALLATION
00027
1.
Use a light coat of antiseize compound on screws. Install taillight (Figure 1, Item 1) with three new self-tapping
screws (Figure 1, Item 2).
2.
Connect ground wire to taillight, if necessary.
3.
Use dielectric grease on pins. Connect taillight connector to wiring harness connector behind bulkhead.
END OF TASK
FOLLOW-ON TASKS
00027
1.
Connect semitrailer to prime mover.
2.
Raise landing legs.
3.
Remove/store chocks and ground boards.
4.
Connect power source and test taillights for proper operation.
END OF TASK
END OF WORK PACKAGE
447-0004
Back to Top
