TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 162 of 640
TM 9-2330-335-14&P
0026-2
0026
REMOVAL
00026
1.
Disconnect wiring harness from clearance light connector behind bulkhead.
2.
Remove self-tapping screws (Figure 1, Item 3) and clearance light (Figure 1, Item 1 or 2). Discard screws.
Figure 1.
Clearance Lights.
026
END OF TASK
INSTALLATION
00026
1.
Apply antiseize compound to self-tapping screws. Install clearance light (Figure 1, Item 1 or 2) and three new
self- tapping screws (Figure 1, Item 3).
2.
Apply dielectric grease to wiring harness pins. Connect wiring harness connector to clearance light connector
behind bulkhead.
END OF TASK
FOLLOW-ON TASKS
00026
1.
Connect semitrailer to prime mover.
2.
Raise landing legs.
3.
Connect power source and test clearance lights for proper operation.
END OF TASK
END OF WORK PACKAGE
447-0053
Back to Top
