TM-9-2330-335-14-P

SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)

SEPTEMBER 2008

TM-9-2330-335-14-P - Page 217 of 640

0039-3/(4 blank)

TM 9-2330-335-14&P

0039

INSTALLATION

00039

1.

Install two pipe plugs (Figure 1, Item 9), drain valve (Figure 1, Item 7), and pipe plug (Figure 1, Item 8) on rear

air reservoir (Figure 1, Item 6).

2.

Install rear air reservoir (Figure 1, Item 6) on mounts using four hex screws (Figure 1, Item 5), washers (Figure 1, Item 4),

two rubber pads (Figure 1, Item 3), and four new locknuts (Figure 1, Item 2).

3.

Install drain valve (Figure 1, Item 7) and pipe plug (Figure 1, Item 8) on front air reservoir (Figure 1, Item 1).

4.

Install front air reservoir (Figure 1, Item 1) on mounts using four hex screws (Figure 1, Item 5), washers

(Figure 1, Item 4), two rubber pads (Figure 1, Item 3), and four new locknuts (Figure 1, Item 2).

END OF TASK

FOLLOW-ON TASKS

00039

1.

Install ECU control valve on rear tank (WP 0035).

2.

Connect semitrailer to prime mover.

3.

Remove tire chocks.

4.

Raise landing legs.

5.

Remove/store ground boards.

6.

Pressurize system.

7.

Check for air leaks.

8.

Road test to ensure safe operation.

END OF TASK

END OF WORK PACKAGE