TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 327 of 640
0069-5/(6 blank)
TM 9-2330-335-14&P
0069
CORROSION PROTECTION - CONTINUED
c.
Annually clean deck wood and roll/spray on boiled linseed oil or a good commercial UV wood protectorate. Apply to
top areas of deck wood.
d.
Protect all exterior areas from rust — clean off rust, prime metal, and paint area.
e.
Application of 10-wt. oil at oil can points as specified by WP 0067 will help protect components and ensure they will
work when needed.
f.
Keep bolster plate drain holes free of grease and debris so they drain/air out freely.
Corrosion Protection
00069
If paint has worn off or damage/repair has taken it off the undercarriage, frame, fillets, gussets, or any other protected area, re-
coat with rust inhibitor and CARC paint.
Kingpin and Bolster Plate
00069
If the kingpin is replaced, inspect the interior structure for rust. Clean and protect the interior with rust inhibitor; do not plug
up bolster plate drain holes. Make sure all welds are protected inside and out. Inspect the kingpin and bolster plate in
accordance with PMCS requirements.
Protection Scheduling
00069
1.
It is a good idea to periodically take a look at the undercarriage, especially after off-road operations. The
following is suggested:
Monthly: Visually inspect the undercarriage for rust and damage. Touch up paint as required.
2.
If operating in a salt or road chemical environment, you should inspect/protect these areas as soon as possible and wash
these areas with clean water as soon as possible after operation.
END OF TASK
END OF WORK PACKAGE
Back to Top
