0071-1
TM 9-2330-335-14&P
0071
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
-
SUSPENSION REPLACEMENT (M871R AND M871A1R)
Removal, Installation
WARNING
•
Jack must be positioned directly under axle to prevent slippage. Direct all personnel to stay clear of
semitrailer when supported in the air. Failure to comply could result in injury or death to personnel
or damage to equipment.
•
To prevent shifting of semitrailer, floor jack should be used only on a hard, level surface. Use
ground boards, if necessary. Check tires. Failure to comply could result in injury or death to
personnel.
INITIAL SETUP
Maintenance Level
0
Direct Support
0
Tools and Special Tools
0
Tool kit, general mechanic’s (Item 4, WP 0082)
0
Shop equipment, automotive maintenance and
repair (Item 3, WP 0082)
0
Floor jack
0
Jack stands
0
Materials/Parts
0
Locknut (32)
0
Personnel Required
0
Four
0
References
0
WP 0111
0
Equipment Conditions
0
Landing legs down
0
Semitrailer disconnected from prime mover
0
Rear of semitrailer supported by jack stands
0
Tires and wheels removed (WP 0021)
0
Hubs and brake drums removed (WP 0033)
0
6