TM-9-2330-335-14-P

SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)

SEPTEMBER 2008

TM-9-2330-335-14-P - Page 351 of 640

0075-3

TM 9-2330-335-14&P

0075

INSTALLATION

00075

WARNING

•

Wear welding mask, gloves, and apron when welding or using cutting torch. Failure to wear

adequate protective clothing may result in injury to personnel.

•

Eye protection is required. Particles from grinding operations are hazardous to the eyes.

1.

Grind the area of the bolster plate (Figure 1, Item 5) under the kingpin (Figure 1, Item 4) 8-in.-round base flush

so that the new kingpin will lie flat on the bolster plate.

2.

Position new kingpin (Figure 1, Item 4) on bolster plate (Figure 1, Item 5).

3.

Drop a plumb line and bob from kingpin (Figure 1, Item 4) to ground and mark spot with a chalk mark (Figure 2).

Figure 2.

Kingpin Placement.

075

447-0192