TRANSFER CONTAINER FROM VEHICLE TO TRAILER - Continued
WARNING
•
Prior to and during the load cycle, all personnel should stay clear
of LHS and container. Failure to comply may result in injury or
death to personnel.
•
Do not attempt loading operations on a side slope greater than
5 degrees and/or fore/aft slope greater than 20 percent. Before
attempting to load on slopes you must determine if ground
surface conditions permit safe loading operations. Slopes that
contain snow, ice, loose gravel, or sand may not permit safe
loading. Failure to comply may result in injury or death to
personnel.
CAUTION
•
Trailer drawbar must be fully retracted and lowered before
starting the loading process. Failure to comply may result in
damage to equipment.
•
Use extreme caution when loading container with side doors.
Container must remain centered and doors must be closed at all
times. Failure to comply may result in damage to equipment.
1.
Fully retract and lower trailer drawbar (WP
0011) and stow cables.
2.
Ensure ISO locks are stowed on ISO lock bracket (WP
0024).
3.
Ensure cart is positioned in container mode (WP
0003). If it is not, position cart in
container mode (WP
0025).
4.
Load container on vehicle. Refer to TB 9-3950-253-13&P (WP
0057).
5.
Release and stow transport locks and rear twist locks. Refer to TB
9-3950-253-13&P (WP
0057).
TM 9-2330-342-10
0027
0027-2