TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 275 of 500

TRANSFER CONTAINER FROM VEHICLE TO TRAILER - Continued

WARNING

Slider bracket on slider may swing down when pin is removed. Support

slider bracket when removing pin. Failure to comply may result in injury

or death to personnel.

NOTE

Slider brackets on both sliders are disengaged the same way. Left side

shown.

6.

Remove safety pin (Figure 1, Item 2) from hitch pin (Figure 1, Item 1).

1

3

2

4

Figure 1.

Transfer Container From Vehicle To Trailer With ECHU.

7.

Remove hitch pin (Figure 1, Item 1) from slider bracket (Figure 1, Item 3) and slider

(Figure 1, Item 4) and rotate slider bracket (Figure 1, Item 3) down.

8.

Install hitch pin (Figure 1, Item 1) through slider (Figure 1, Item 4) and slider bracket

(Figure 1, Item 3).

9.

Install safety pin (Figure 1, Item 2) in hitch pin (Figure 1, Item 1).

10.

Repeat Steps (6) through (9) for right side slider bracket.

11.

Remove lynch pin (Figure 2, Item 1) from clevis pin (Figure 2, Item 4).

TM 9-2330-342-10

0027

0027-3