TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 283 of 500

TRANSFER CONTAINER FROM VEHICLE TO TRAILER - Continued

NOTE

•

As container is being loaded onto cart, ensure that rear corner

fittings on container align with and clear top of cart pegs. This

allows container to be loaded correctly onto cart. Due to

variations in the level of the ground between vehicle and trailer,

loading process may need to be stopped just prior to container

contacting cart to allow adjustment of cart.

•

If adjustment of cart is needed; stop loading process, stand at

side of trailer next to cart, and use container locks as a handle to

align rear corner fittings on container with cart pegs.

•

If adjusting cart does not aid in aligning rear corner fittings on

container with top of cart pegs, adjust vehicle CTIS tire pressure,

refer to vehicle Operator's manual (WP

0057) and/or trailer tire

pressure (WP

0054) until rear corner fittings on container are

aligned with and clear top of cart pegs. Ensure bumper

attachment remains in contact with and under vehicle bumper

plate.

36.

Turn hydraulic selector switch to MAN H.A. position. Refer to vehicle Operator's

manual (WP

0057).

37.

Move joystick to UNLOAD position. Refer to vehicle Operator's manual (WP

0057).

38.

Unload container (Figure 8, Item 1) until container (Figure 8, Item 1) is properly seated

on cart (Figure 8, Item 3) and cart pegs (Figure 8, Item 2).

TM 9-2330-342-10

0027

0027-11