Table
1.
OPERATOR'S PMCS - BEFORE - Continued.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
2
Before
Brakes
CAUTION
•
Do not increase
engine speed of
vehicle above
1,200 RPM or
pull trailer more
than 2.0 ft (609.6
mm). Failure to
comply may
result in damage
to equipment.
•
Trailer must be
unloaded prior to
performing
brake test.
Failure to comply
may result in
damage to
equipment.
NOTE
Trailer air system must
be fully charged to 120
psi (827 kPa).
Check operation of trailer
handbrake control by
connecting trailer (WP
0010) to
towing vehicle or to vehicle
other than PLS (WP
0012).
Refer to vehicle Operator's
manual (WP
0057).
With engine at idle, apply
service brake pedal. Refer to
vehicle Operator's manual
(WP
0057).
TM 9-2330-342-10
0048
0048-2