TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 404 of 500

Table

1.

OPERATOR'S PMCS - BEFORE - Continued.

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

4

Before

ISO Locks (if

container is

loaded on trailer)

Check to make sure container

is secured to trailer by ISO locks

(Figure 2, Item 1) and that ISO

locks (Figure 2, Item 1) are in

fully locked position. If ISO

locks (Figure 2, Item 1) are not

in fully locked position, use

crank handle to tighten ISO lock

adjustment screw (Figure 2,

Item 5) to secure container to

trailer.

Container is not

secured by ISO locks.

5

Before

ISO Lock Pins and

Lanyards

Check hitch pins (Figure 2, Item

2), safety pins (Figure 2, Item

3), and lanyards (Figure 2, Item

4) for proper operation

(WP

0024).

ISO lock pins do not

operate properly.

Check hitch pins (Figure 2, Item

2), safety pins (Figure 2, Item

3), and lanyards (Figure 2, Item

4) for damage.

ISO lock pins are

damaged or missing.

6

Before

Cart Rollers

(Rear)

Check cart rollers (rear) (Figure

3, Item 4) for damage.

Cart rollers (rear) are

cracked, missing, or

broken.

Cart rollers (rear) do

not roll freely.

TM 9-2330-342-10

0048

0048-6