TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 268 of 1348
BLACK
RED
Figure 5.
Button Probe Leads.
4.
Connect button probe cable red and black leads together.
5.
Perform ICE Offset Test 91.
CONDITION/INDICATION
Does test equipment pass offset test?
DECISION
Yes - Go to (Step 6 - Is continuity measured between rear side marker light ground contact and a known good
ground?).
No - Test equipment failed offset. Contact your Supervisor.
STEP 6
Is continuity measured between rear side marker light ground contact and a known good ground?
1.
Remove two screws and lens cover (WP
0054).
SCREWS
LENS
COVER
GROUND
CONTACT
GROUND
CONTACT
REAR SIDE
MARKER LIGHTS
Figure 6.
Rear Side Marker Lights and Ground Contact.
2.
Connect button probe cable red lead to rear side marker light ground contact.
3.
Connect button probe cable black lead to a known good ground.
4.
Perform ICE Test 91.
5.
Meter reading should display less than 200 ohms.
TM 9-2330-342-23&P
0023
0023-6
Back to Top
