TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 276 of 1348

CONDITION/INDICATION

Are 22 to 28 vdc measured on wire 1003C at rear junction box, terminal wire 1003C?

DECISION

Voltage OK - Go to (Step 6 - Can composite light harness wire 1003C be repaired?).

Voltage Faulty - Go to (Step 5 - Can trailer main harness wire 1003C be repaired?).

STEP 5

Can trailer main harness wire 1003C be repaired?

WARNING

Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around vehicle.

Jewelry and tools can catch on equipment, contact positive electrical circuits, and cause a

direct short, severe burns, or electrical shock. Failure to comply may result in injury or death

to personnel.

NOTE

Wire is not repairable if damage cannot be visually located or if a prior repair has already

reduced length of wire. Wire is not repairable if after repair, wire is too short to reach its

connection point.

1.

Have assistant release brake pedal. Refer to vehicle Operator's manual (WP

0190).

CONNECTOR

MC15

TRAILER

HARNESS

Figure 5.

Trailer Harness Connector MC15.

2.

Visually check if trailer main harness wire 1003C can be repaired.

CONDITION/INDICATION

Can trailer main harness wire 1003C be repaired?

DECISION

Repair - Repair wire 1003C (WP

0055). Go to (Step 7 - Do stoplights operate?) to verify problem is solved.

No Repair - Replace main trailer harness (WP

0059). Go to (Step 7 - Do stoplights operate?) to verify problem is

solved.

TM 9-2330-342-23&P

0024

0024-6