TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 726 of 1348
INSTALLATION - Continued
1
2
3
4
Figure 12.
Brake Power Regulator Valve Installation.
END OF TASK
ADJUSTMENT
WARNING
Adjusting rods must be properly aligned prior to operating the trailer or the trailer brakes may
not apply correctly. Failure to comply may result in injury or death to personnel.
1.
Loosen screw (Figure 13, Item 7) and move rod (Figure 13, Item 8) until distance from point A to point B is
6.50 in. (165.1 mm). Tighten screw (Figure 13, Item 7).
A
B
8
1
6
C
D
4
3
2
5
7
6.5 in. (165.1 mm)
14.0 in. (355.6 mm)
15.50 in. (393.7 mm)
Figure 13.
Brake Power Regulator Valve Adjustment.
2.
Loosen clamp or clamps (Figure 13, Item 1) and adjust rod (Figure 13, Item 6) until distance between points
B and C is 14.0 in. (355.6 mm).
3.
Tighten clamp (Figure 13, Item 1) on rod (Figure 13, Item 6).
TM 9-2330-342-23&P
0080
0080-8
Back to Top
