TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 721 of 1348
REMOVAL - Continued
1
2
3
4
5
6
7
8
Figure 3.
Brake Power Regulator Valve Removal.
NOTE
Perform Step (4) if bracket is damaged.
4.
Remove two screws (Figure 3, Item 1), locknuts (Figure 3, Item 4), and bracket (Figure 3, Item 2) from frame
(Figure 3, Item 3). Discard locknuts.
5.
Loosen screw (Figure 3, Item 7) and remove rod (Figure 3, Item 6) from valve (Figure 3, Item 8).
CAUTION
Do not remove screws from brake power regulator. The halves of the regulator can separate,
causing damage to regulator.
6.
Remove four nuts (Figure 4, Item 1), lockwashers (Figure 4, Item 2), and valve (Figure 4, Item 5) from valve
bracket (Figure 4, Item 3). Leave screws (Figure 4, Item 4) in valve body. Discard lockwashers.
1
2
3
4
5
Figure 4.
Brake Power Regulator Valve Removal.
7.
Loosen clamp (Figure 5, Item 6) and remove rubber connector (Figure 5, Item 7) from rod (Figure 5, Item 8).
TM 9-2330-342-23&P
0080
0080-3
Back to Top
