TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 768 of 1348

REMOVAL - Continued

NOTE

The relief valve is marked with an arrow to show proper direction during installation. Note

direction of arrow, or if arrow is missing, or obscured, mark relief valve to aid in installation.

2.

Remove air lines 2231 (Figure 1, Item 3) and 2232 (Figure 1, Item 1) from fittings (Figure 1, Item 5) and (Figure

1, Item 2).

3.

Remove fitting (Figure 2, Item 1) from valve (Figure 2, Item 2).

2

1

3

Figure 2.

Relief Valve Removal.

4.

Remove fitting (Figure 2, Item 3) from valve (Figure 2, Item 2).

END OF TASK

INSTALLATION

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. Keep away from open flame and use in well-ventilated

area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately

with soap and water. Failure to comply may result in injury or death to personnel.

CAUTION

Use sealing compound sparingly and only on threads. Do not apply compound on hose

connections. Damage to equipment may result.

NOTE

Install cable ties as required.

1.

Apply sealing compound on threads of fitting (Figure 3, Item 3).

TM 9-2330-342-23&P

0088

0088-2