TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 856 of 1348
INSTALLATION - Continued
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately
with soap and water. Failure to comply may result in injury or death to personnel.
6.
Apply primer to threads of two screws (Figure 3, Item 5).
7.
Apply sealing compound to threads of two screws (Figure 3, Item 5) and install roller (Figure 3, Item 7) on two
bushings (Figure 3, Item 6) and roller bracket (Figure 3, Item 4) with two screws (Figure 3, Item 5). Tighten
screws to 20 lb-ft (27 N·m).
8.
With the aid of an assistant, install rear roller assembly (Figure 4, Item 5) on cart (Figure 4, Item 3) with two
screws (Figure 4, Item 4) and locknuts (Figure 4, Item 6).
2
4
5
6
3
7
1
Figure 4.
Cart Rear Roller and Spring Installation.
9.
Install hitch pin (Figure 4, Item 1) in cart pivot bracket (Figure 4, Item 7) and cart (Figure 4, Item 3).
10.
Install lynch pin (Figure 4, Item 2) in hitch pin (Figure 4, Item 1).
END OF TASK
FOLLOW-ON MAINTENANCE
Remove wheel chocks (TM 9-2330-342-10). (WP
0190)
END OF TASK
END OF WORK PACKAGE
TM 9-2330-342-23&P
0100
0100-4
Back to Top
