TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 851 of 1348

INSTALLATION - Continued

1

2

3

4

5

6

Figure 2.

Cart Installation.

2.

Repeat Step (1) for right side rear roller assembly.

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. Keep away from open fire and use in well-ventilated

area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately

with soap and water. Failure to comply may result in injury or death to personnel.

NOTE

Both wear pads are installed the same way. Left wear pad shown.

3.

Apply sealing compound to threads of two screws (Figure 2, Item 3), and install wear pad (Figure 2, Item 4)

on cart (Figure 2, Item 1) with two screws (Figure 2, Item 3).

4.

Repeat Step (3) for right side wear pad.

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Install left and right side cart lower support rollers. (WP

0097)

TM 9-2330-342-23&P

0099

0099-3