TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 844 of 1348
REMOVAL - Continued
1
2
Figure 4.
Cart Pivot Bracket Removal.
END OF TASK
INSTALLATION
NOTE
•
Perform Steps (1) and (2) if hitch pins or wire ropes were replaced.
•
All three wire ropes are installed on hitch pins the same way.
•
Inside diameter of each loop should be 1 in. (2.5 cm).
1.
Install hitch pin (Figure 5, Item 2) on 17.00 in. (43.18 cm) long wire rope (Figure 5, Item 3) with swagging sleeve
(Figure 5, Item 1).
2
3
4
1
1 in.
(2.5 cm)
1 in.
(2.5 cm)
Figure 5.
Cart Pivot Bracket Installation.
2.
Install swagging sleeve (Figure 5, Item 4) on 17.00 in. (43.18 cm) long wire rope (Figure 5, Item 3).
TM 9-2330-342-23&P
0098
0098-4
Back to Top
