TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 845 of 1348
INSTALLATION - Continued
NOTE
•
Perform Steps (3) and (4) if lynch pins or wire ropes were replaced.
•
All three wire ropes are installed on lynch pins the same way.
•
Inside diameter of each loop should be 1 in. (2.5 cm).
3.
Install lynch pin (Figure 6, Item 2) on 15 in. (38 cm) long wire rope (Figure 6, Item 3) with swagging sleeve
(Figure 6, Item 1).
2
3
4
1
1 in.
(2.5 cm)
1 in.
(2.5 cm)
Figure 6.
Cart Pivot Bracket Installation.
4.
Install swagging sleeve (Figure 6, Item 4) on 15 in. (38 cm) long wire rope (Figure 6, Item 3).
NOTE
Perform Steps (5) and (6) if hitch pins and lynch pins were removed.
5.
Install three wire ropes (Figure 7, Item 5) and lynch pins (Figure 7, Item 1) on rapid link (Figure 7, Item 4).
TM 9-2330-342-23&P
0098
0098-5
Back to Top
