TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 837 of 1348
REMOVAL - Continued
NOTE
Perform Step (12) if grease fitting needs to be removed.
12.
Remove grease fitting (Figure 4, Item 2) from clevis pin (Figure 4, Item 3).
END OF TASK
INSTALLATION
NOTE
•
Both rollers are installed the same way. Left side shown.
•
Perform Step (1) if grease fitting was removed.
1.
Install grease fitting (Figure 5, Item 2) on clevis pin (Figure 5, Item 3).
1
2
3
5
6
7
4
Figure 5.
Cart Lower Support Roller Installation.
NOTE
Install washers as noted prior to removal.
2.
Install roller (Figure 5, Item 6) on cart (Figure 5, Item 1) with washer (Figure 5, Item 5), washer (Figure 5, Item
4), clevis pin (Figure 5, Item 3), and washer (Figure 5, Item 7).
NOTE
Hole in collar for spring pin is offset. Install collar as noted prior to removal.
3.
Install collar (Figure 6, Item 3) on clevis pin (Figure 6, Item 1) with spring pin (figure 6, Item 2).
TM 9-2330-342-23&P
0097
0097-5
Back to Top
