TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 830 of 1348
INSTALLATION - Continued
NOTE
•
Perform Steps (3) and (4) if lynch pin or wire rope was replaced.
•
Inside diameter of each loop should be 1 in. (2.5 cm).
3.
Install lynch pin (Figure 6, Item 2) on 9 in. (23 cm) long wire rope (Figure 6, Item 3) with swagging sleeve
(Figure 6, Item 1).
2
3
4
1
1 in.
(2.5 cm)
1 in.
(2.5 cm)
Figure 6.
Cart Container Lock Installation.
4.
Install swagging sleeve (Figure 6, Item 4) on 9 in. (23 cm) long wire rope (Figure 6, Item 3).
NOTE
Perform Steps (5) and (6) if hitch pin and lynch pin were removed.
5.
Install wire rope (Figure 7, Item 3) and lynch pin (Figure 7, Item 2) on rapid link (Figure 7, Item 4).
1
2
3
4
5
Figure 7.
Cart Container Lock Installation.
TM 9-2330-342-23&P
0096
0096-4
Back to Top
