TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 829 of 1348
REMOVAL - Continued
7.
Cut wire rope (Figure 4, Item 2) and remove hitch pin (Figure 4, Item 1) from wire rope (Figure 4, Item 2).
Discard wire rope and two swagging sleeves.
1
2
Figure 4.
Cart Container Lock Removal.
END OF TASK
INSTALLATION
NOTE
•
Perform Steps (1) and (2) if hitch pin or wire rope was replaced.
•
Inside diameter of each loop should be 1 in. (2.5 cm).
1.
Install hitch pin (Figure 5, Item 2) on 15 in. (38 cm) long wire rope (Figure 5, Item 3) with swagging sleeve
(Figure 5, Item 1).
2
3
4
1
1 in.
(2.5 cm)
1 in.
(2.5 cm)
Figure 5.
Cart Container Lock Installation.
2.
Install swagging sleeve (Figure 5, Item 4) on 15 in. (38 cm) long wire rope (Figure 5, Item 3).
TM 9-2330-342-23&P
0096
0096-3
Back to Top
