TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 825 of 1348
INSTALLATION - Continued
HYDRAULIC
FLOOR JACK
WHEEL CHOCK
1
2
3
4
5
7
9
8
6
Figure 2.
Bumper Installation.
WARNING
Bumper weighs 125 lbs (57 kg). Do not lift or move bumper without the aid of an assistant
and lifting device. Failure to comply may result in injury or death to personnel.
2.
With the aid of assistant, wheel chock, and hydraulic floor jack, position bumper (Figure 2, Item 1) against
frame (Figure 2, Item 6) and align holes.
WARNING
Keep a firm grip on bumper as bumper is being moved to keep bumper from rolling forward.
Failure to comply may result in injury or death to personnel.
3.
Install bumper (Figure 2, Item 1) on frame (Figure 2, Item 6) with eight screws (Figure 2, Item 7) and locknuts
(Figure 2, Item 5).
4.
Remove hydraulic floor jack and wheel chock from bumper (Figure 2, Item 1).
END OF TASK
TM 9-2330-342-23&P
0095
0095-3
Back to Top
