TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 162 of 1364
TM 9-2350-238-20-1
2-12. ELECTRICAL CIRCUIT TROUBLESHOOTING (CONT).
Step 6.
Disconnect wiring harness (leads 1, 2, 478, and 506) from voltage
regulator. Disconnect leads 415 and GND from generator cooling fan at
disconnect in driver’s compartment. Check resistance between generator
terminal B+ and ground. If multimeter indicates 0 to 4 ohms, go to step 8.
If multimeter indicates more than 4 ohms, replace generator. Refer to
page 2-552. Connect leads 415 and GND to generator cooling fan at
disconnect in driver's compartment. Connect wiring harness to voltage
regulator.
2-136
Back to Top
