TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 169 of 1364

TM 9-2350-238-20-1

Step 6.

Check resistance between plug pin C (lead 478) and ground. Check

resistance between plug pin D (lead 1 ) and ground. If multimeter indicates

0 to 4 ohms on each pin, go to step 12. If multimeter indicates more than

4 ohms on one or both pins, go to step 7. Connect wiring harness to

voltage regulator.

Step 7.

To access generator, remove hull engine compartment deck assembly lid,

refer to page 2-935; and remove radiator support beam, refer to page

2-525. Disconnect lead 3 from generator terminal E-. Check continuity

between lead 3 and ground. If continuity exists, go to step 8. If no

continuity exists, repair lead 3 between generator and ground. Refer to

page 2-371. Connect lead 3 to generator terminal E-.

2-143