TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 578 of 1364

TM 9-2350-238-20-1

2-66. MAINTENANCE OF COOLING SYSTEM FAN TENSlONER AND RELATED PARTS

(CONT).

NOTE

There must be a distance of 0.50 in.

(1.27 cm) between bottom of spring

retainer and top of fan tensioner

coupling plate (1).

1

Loosen hexagon plain nut (2), then tighten

self-locking nut (3) to bring bottom of

spring retainer (4) to top line on instruction

plate (5).

2

Tighten hexagon plain nut (2).

2-67. MAINTENANCE OF GENERATOR AND COOLING AIR INTAKE SYSTEM.

This task covers:

a.

Removal

b.

Inspection/Repair

c.

Installation

INITIAL SETUP

Tools and Special Tools

Plier wire twister (item 30, appx G)

References

TM 9-2350-238-24P-1

Materials/Parts

Duct to bulkhead gasket

Elbow to bulkhead gasket

Gasket

Gasket

Lockwire (item 26, appx C)

Lockwire (item 27, appx C)

Preformed packing

Self-locking nut

Self-locking nut (6)

Equipment Conditions

2-384 Powerplant removed

2-552