TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 583 of 1364

TM 9-2350-238-20-1

2

2-68. MAINTENANCE OF VOLTAGE REGULATOR AND RELATED PARTS.

This task covers:

a.

Removal/Disassembly

b.

Inspection/Repair

c.

Reassembly/Installation

INITIAL SETUP

Materials/Parts

Lockwasher (2)

Lockwasher (2)

General Safety Instructions

References

TM 9-2350-238-24P-1

Failure to remove or disconnect

batteries before removing or installing

any electrical wiring harness or lead

may result in injury or damaged

equipment.

Equipment Conditions

2-923

CO cylinder access cover

removed

2-640

Batteries disconnected

1

2

Failure to remove or disconnect

batteries before removing or installing

any electrical wiring harness or lead

may result in injury or damaged

equipment.

Disconnect two electrical connectors (1)

from voltage regulator (2).

Remove assembled washer screw (3), two

Iockwashers (4), hexagon head capscrew

(5), two Iockwashers (6), and electrical

grounding lead (7).

Remove three assembled washer bolts

(8), assembled washer bolt (9), and four

flat washers (10) from two regulator

mounting brackets (11 ).

Remove voltage regulator (2) with

attached mounting brackets.

Remove four screws (12), four washers

(13), and two regulator mounting brackets

(11) from voltage regulator (2).

3

4

5

2-557